=============================
=
= DeHavilland DHC6-300S
= PROPANEL FOR FS2002
=
=============================

FOR FS2002 PRO ONLY

FS2002 DHC6-300S TWIN OTTER PRO PANEL

Designed by Barry Blaisdell.
barrywb@snet.net

All my FS2002 Twin Otter come with the DEFAULT
Beech KA350 Panel and Sound....To use my
FS2002 DHC6-300S TWIN OTTER PRO PANEL
See the Instructions Below.
----------------------------------------------------------------------
First you have to download the 4 files shown below.

Download propnl22.zip .........The Panel
Download prosnd-1.zip .........The Sound - Part 1
Download prosnd-2.zip .........The Sound - Part 2
Download pnl22upd.zip .........The Panel Update adding Internal Views etc
-------------------------------------------------------------------------

DOWNLOAD FROM:
Premier Aircraft Design
http://www.flightsimnetwork.com/premaircraft/
or from SurClaro or SurClaro.com.....
**************************************************
INSTALLATION:

1. The panel:

PROPNL22.ZIP

UNZIP INTO THE MAIN FS2002 FOLDER,
MAKING SURE THE " USE FOLDER NAMES " BOX IN
WINZIP IS CHECKED...WINZIP WILL THEN EXTRACT
THE PREMIER PRO PANEL & UPDATE INTO THE FSFSCONV FOLDER THAT
WILL BE CREATED IN THE FS2002 AIRCRAFT DIRECTORY.

2. The Sound:

THEN DO THE SAME WITH THE PROSND-1.ZIP
THEN DO THE SAME WITH THE PROSND-2.ZIP

3. The Update:

PNL22UPD.ZIP

Using Windows Explorer or My Computer go into
the FS2002 AIRCRAFT FOLDER and then Navigate
to the Twin Otter Folder you chose...Open It.

You will find inside a Folder called PROPNL22...Open it
and COPY & PASTE THE NEW PANEL & SOUND FOLDERS
into your Twin Otter Folder..These will replace the default
Beech KA350 Panel and Sound...That it..Go Flying
***************************************************

FYI - Now whenever you download another of my FS2002 Twin Otters
all you have to do is COPY & PASTE THE NEW PANEL & SOUND FOLDERS
from the included PROPNL22 folder into your NEW Twin Otter Folder....Thats It

Plus there's a GPS,Checklist, Map, and ATC Simicons on the panel

========================================================

NOTAM: FOR USING OTHER PANELS...YOU MAY HAVE
TO ADJUST THE [RADIOS] SECTION IN THE AIRCRAFT.CFG
TO MATCH THE OTHER PANEL.

Copy & Paste the [Radios] section below for panels
that use Stand-by Frequencys...

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 1, 1
Nav.2=1, 1, 0
Adf.1=1
Transponder.1=1
Marker.1=1

=======================================================
Barry Blaisdell
Email: barrywb@snet.net

ALL FILES ARE Copyright 2002 by the author(s).